RAG Marine - Palm Bay, Florida

Product Catalog

Shop over 27,000 products from over 300 Vendors.

Shop Now!

How to Change your Boats Engine Oil

If you have a boat, then you know that one of the most important maintenance tasks is changing the engine oil. This needs to be done on a regular basis in order to keep the engine running smoothly. In this article, we'll give you some tips on how to change your boat engine oil.

Shop Boat Engine Oil Changing products

Outboard Engine Oil Change

If you have an outboard engine, it's important to change the oil regularly to keep it running properly. Here are some tips on how to change your boats outboard engine oil:

1. Choose the right oil. Check your owner's manual or the manufacturer's website to find out what type of oil is best for your engine.

2. Warm up the engine. This will help the oil flow more easily.

3. Remove the old oil. Use a wrench to loosen the oil drain plug and let the old oil drain into a catch pan.

4. Replace the oil filter. Unscrew the old filter and screw on a new one.

5. Fill with new oil. Pour new oil into the engine, being careful not to overfill it. Check your owner's manual for the correct amount of oil to use.

6. Replace the drain plug and tighten it securely with a wrench.

7. Start the engine and check for leaks around the drain plug and filter

Inboard Engine Oil Change

It's important to change the oil in your inboard engine regularly to keep it running smoothly. Here are some tips on how to do it:

1. First, you'll need to warm up the engine to loosen the oil. This can be done by running it at idle for a few minutes.

2. Next, locate the oil drain plug and remove it. Be careful not to lose the washer that's under the plug!

3. Allow the oil to drain into a catch pan until it slows to a drip.

4. Once the oil has finished draining, replace the drain plug and add fresh oil. Make sure you consult your owner's manual for the correct type and amount of oil to use.

5. Finally, start up the engine and check for leaks around the drain plug. If everything looks good, you're all set!

Inboard engines are a bit more work to change the oil on, but it's important to do it regularly. With these tips, you should be able to do it yourself without any problems.

Diesel Engine Oil Change

It's important to change your boat engine's oil regularly in order to keep it running smoothly. Here are some tips on how to change your diesel engine oil:

1. Warm up the engine before changing the oil. This will help loosen the old oil and make it easier to drain out.

2. Carefully remove the old oil filter and replace it with a new one.

3. Drain the old oil into a container and dispose of it properly.

4. Fill the engine with new oil, making sure not to overfill it.

5. Start up the engine and check for any leaks.

6. Clean up any oil spills and dispose of all used oil and filters properly.

Diesel Engine Maintenance

In addition to regular oil changes, there are a few other things you can do to keep your diesel engine running smoothly.

1. Check the engine's coolant level regularly and add more if necessary.

2. Inspect the engine's belts and hoses for any signs of wear or damage.

3. Change the fuel filter every few months to remove any dirt or debris from the fuel system.

4. Have the engine's injectors cleaned or replaced as needed.

Shop Boat Engine Oil Changing products

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

Featured collection